本文发表在 rolia.net 枫下论坛Red Hat Linux/x86 9 (Shrike)
====================================

The contents of this CD-ROM are Copyright (C) 1995-2003 Red Hat, Inc. and
others. Please see the individual copyright notices in each source package
for distribution terms. The distribution terms of the tools copyrighted by
Red Hat, Inc. are as noted in the file EULA.

Red Hat and RPM are trademarks of Red Hat, Inc.

============================================================================
DIRECTORY ORGANIZATION

Red Hat Linux is delivered on six CD-ROMs (disc 1 through disc
6). Disc 1 can be directly booted into the installation on most modern
systems, and contains the following directory structure (where
/mnt/cdrom is the mount point of the CD-ROM):

/mnt/cdrom
|----> RedHat
| |----> RPMS -- binary packages
| `----> base -- information on this release of Red Hat
| Linux used by the installation process
|----> images -- boot and driver disk images
|----> dosutils -- installation utilities for DOS
|----> README -- this file
|----> RELEASE-NOTES -- the latest information about this release
| of Red Hat Linux
`----> RPM-GPG-KEY -- GPG signature for packages from Red Hat

Discs 2 and 3 are similar to disc 1, except that only the RedHat
subdirectory is present.

The directory layout of discs 4, 5, and 6 are as follows:

/mnt/cdrom
|----> SRPMS -- source packages
`----> RPM-GPG-KEY -- GPG signature for packages from Red Hat

If you are setting up an installation tree for NFS, FTP, or HTTP
installations, you need to copy the RELEASE-NOTES files and all files
from the RedHat directory on discs 1-3. On Linux and Unix systems, the
following process will properly configure the /target/directory on
your server (repeat for each disc):

1) Insert disc
2) mount /mnt/cdrom
3) cp -a /mnt/cdrom/RedHat /target/directory
4) cp /mnt/cdrom/RELEASE-NOTES* /target/directory
5) umount /mnt/cdrom

Red Hat Linux is also available on a bootable DVD-ROM for compatible
systems. The DVD-ROM contains all installation files and binaries (the
contents of CD-ROM discs 1, 2, and 3) as well as source RPMS (discs 4,
5 and 6) and has the following directory structure (where /mnt/cdrom
is the mount point of the DVD-ROM):

/mnt/cdrom
|----> RedHat
| |----> RPMS -- binary packages
| `----> base -- information on this release of Red Hat
| Linux used by the installation process
|----> SRPMS -- source packages
|----> images -- boot and driver disk images
|----> dosutils -- installation utilities for DOS
|----> README -- this file
|----> RELEASE-NOTES -- the latest information about this release
| of Red Hat Linux
`----> RPM-GPG-KEY -- GPG signature for packages from Red Hat

============================================================================
INSTALLING

Many computers can now automatically boot from CD-ROMs. If you have such a
machine (and it is properly configured) you can boot the Red Hat Linux
CD-ROM directly without using any boot diskettes. After booting, the Red
Hat Linux installation program will start, and you will be able to install
your system from the CD-ROM.

If your computer must use a boot diskette to start the Red Hat Linux
installation process, you must use one or more image files to create
the necessary diskettes. You can find the necessary image files in
the images directory. This directory contains the following image
files:

- bootdisk.img - primary boot diskette image file

- drvblock.img - image file containing supplemental block device
drivers

- drvnet.img - image file containing supplemental network drivers

- pcmciadd.img - PCMCIA driver image file

A diskette created from the the bootdisk.img file is used to boot all
installations, no matter what installation method you select.

In addition, if you are performing anything other than a CD-ROM or
hard disk installation using only IDE/ATAPI devices, you will also
need to create one or more driver diskettes using one or more of the
driver diskette image files.

A diskette created from the drvblock.img file is required when the
system contains any non-IDE mass storage devices (such as SCSI disk
or CD-ROM drives) that are to be used during the installation.

A diskette created from the drvnet.img file is required when a
network-based installation method is to be used.

A diskette created from the pcmciadd.img file is required when
PCMCIA devices (such as a PCMCIA-based CD-ROM drive or network
adapter) are to be used during the installation.

To write any of these image files to a diskette, use either the
rawrite program in the dosutils directory, or 'dd' under any
Linux-like system. These programs will transfer the contents of the
image file to a diskette. Once the necessary diskettes have been
created, insert the boot diskette and boot your machine.

Also in the images/ directory is boot.iso. This file is an ISO
image that can be used to boot the Red Hat Linux installation
program. It is a handy way to start network-based installations
without having to use multiple diskettes. To use boot.iso, your
computer must be able to boot from its CD-ROM drive, and its BIOS
settings must be configured to do so. You must then burn boot.iso
onto a recordable/rewriteable CD-ROM.

============================================================================
GETTING HELP

For those that have web access, see http://www.redhat.com. In particular,
access to our mailing lists can be found at:

http://www.redhat.com/mailing-lists

If you do not have web access you can still subscribe to the main mailing
list.

To subscribe, send mail to Shrike-list-request@redhat.com with

subscribe

in the subject line. You can leave the body empty.更多精彩文章及讨论，请光临枫下论坛 rolia.net