This topic has been archived. It cannot be replied.
-
枫下家园 / 电脑电信 / 关于freephoneline 设置问题, 我的适配器工作,但是往外拨号按完拨号键后要等很久才连上,接电话似乎问题不大。请问往外拨号连接是本来就这么慢,还是修改设置参数什么的可以加快连通速度?
-seyou(懒洋洋);
2020-4-7
(#12841416@0)
-
fongo论坛上有配置说明
-stone-bridge(...---...);
2020-4-7
(#12841424@0)
-
基本配置我已经按网站说明设置好了,比如SIP, PORT什么的,也可以打电话,就是觉得往外打的时候连通很慢,不知道什么原因,修改适配器dial 参数有帮助吗?
-seyou(懒洋洋);
2020-4-7
(#12841433@0)
-
修改参数有帮助,可以手动改一下。或者拨出时最后加#号。
-dongji(冬季阳光);
2020-4-7
(#12841487@0)
-
你们的适配器可能有些问题,我家里用cisco最便宜的哪个,一直bell, rogers换来换去; 很久了,基本上没有问题。(除了它服务器down)
-hunhunhunhun(不知道);
2020-4-7
(#12841499@0)
-
我的也是cisco spa112. 能否告知一下你的setup 里面的"dial plan" 是什么吗?我的可能设的不好。
-seyou(懒洋洋);
2020-4-7
(#12841564@0)
-
Recommended Linksys Dial String:
(911|[2-9]xxxxxxxxx|1xxxxxxxxxx|011xxxxxxxxxxxx.|98*|[6-7]x*xxxxxxxxxxx.)
(please note that this is a Linksys dial string we use for our devices and may not work with third party, non-Linksys/Sipura devices)
-hunhunhunhun(不知道);
2020-4-7
(#12841578@0)
-
只要有这个[2-9]xxxxxxxxx就可以加快加拿大号码的拨打速度。另外 =上面的98*应该为*98,这个是查语音信箱的命令,搞错了无法查语音留言。
-dongji(冬季阳光);
2020-4-7
(#12841596@0)
-
不懂这些,一直没有修改过。
-hunhunhunhun(不知道);
2020-4-7
(#12841613@0)
-
thanks.
-seyou(懒洋洋);
2020-4-7
(#12841655@0)
-
这个是linksys的,不过我可以试着看看有无改善。谢谢
-seyou(懒洋洋);
2020-4-7
(#12841597@0)
-
我一直是这样设置的,盒子是 cisco 2ports phone adapter,没有动过。
-hunhunhunhun(不知道);
2020-4-7
(#12841611@0)
+1
-
改了。确实拨出去比原来快了一些,不用等那么漫长了。谢谢!
-seyou(懒洋洋);
2020-4-7
(#12841638@0)
-
Inbound/Outbound Proxy:
voip.freephoneline.ca
Registration Expires:
180 to 3600
Use Preferred Codec:
G711U or G729a
Use Preferred Codec Only:
No
RTP Packet Size:
0.020
Ring Tone Frequency:
52
Ring Tone Voltage:
90
-hunhunhunhun(不知道);
2020-4-7
{251}
(#12841583@0)
-
拨完最后加个#
-akoei(停车**枫林晚);
2020-4-15
(#12870365@0)