This topic has been archived. It cannot be replied.
-
枫下家园 / 电脑电信 / 装了shibby版的西红柿,貌似其统计功能太强大了。不仅看到了最近网内所有访问过的站点,还看到了网内某个IP发出的搜索关键词,好玩。
-akoei(停车**枫林晚);
2014-8-20
(#8939531@0)
-
能刷的型号很少,多数是华硕 , Cisco, 但个别的型号需要先刷DD-wrt, 然后再刷Tomato, 否则就成砖头了, 需要非常小心。
-columbus(Edgar);
2014-8-20
(#8939800@0)
-
是的,我的型号不再shibby的官方列表上,但因为有一个tomatoano的project,我发现有人使用同款路由上了shibby的版本,加上我之前已经是标准版的1.28,加上查芯片和rom是与wrt54g一样的4712和4M,就冒险一下刷了K24版。结果还是不错的,不过比标准版有点慢,还在设置时死过一次,目前还满意。
-akoei(停车**枫林晚);
2014-8-20
{20}
(#8939825@0)
-
我把公司的和家里几个能刷的,全刷了,在家里做AP。 还被同事拿去了几个呢,功能太强大,没办法。
-columbus(Edgar);
2014-8-20
(#8939987@0)
-
有个同事被儿子上网烦恼死了,现在好了,他使用俺给他刷的Tomato Shibby, 快把他儿子玩死了!
-columbus(Edgar);
2014-8-20
(#8940005@0)
-
有些功能重复,比如bandwidth和ip traffic,若能只留ip traffic而多谢空间应该会更好
-akoei(停车**枫林晚);
2014-8-20
(#8940100@0)
-
Cisco Wrt160 v3, Netgear 2000 v2 要特别小心,都被俺刷成了砖头,还好又给刷回了原厂的, 找到问题后才刷成功Tomato.
-columbus(Edgar);
2014-8-20
(#8940149@0)
-
那你这种还不算砖头。我现在的这个路由器,当时刷成真正的砖头,打开外壳用jtag线才救回来的,之后不敢轻易动手了,太麻烦
-akoei(停车**枫林晚);
2014-8-20
(#8941098@0)
-
Cisco E2500 v1, Netgear3400 v1 也是把我吓出一身冷汗。 感觉刷好了, 但就是无法登陆设置界面, 原来是必须再做一次30-30-30。另外刷好之后必须登陆界面删除原厂firm, 否则会不稳定。
-columbus(Edgar);
2014-8-20
(#8941224@0)
-
还有一个bug,就是在ip traffic里的view graph,只能显示11个IP,我家里的很多设备不被统计,只好用它下面的transfer rate看实时IP流量
-akoei(停车**枫林晚);
2014-8-20
(#8941094@0)