This topic has been archived. It cannot be replied.
-
枫下家园 / 电脑电信 / 显示器“ Analog Power Saving Mode” 求教DeLL 显示器开机时出现“ Analog Power Saving Mode”,不能Boot. 网上差了一下, 关闭电源后,重新安装主板纽扣电池和内存条可排除故障。试了一下,顺利启动了, 不过关机后再启动时又出现了同样问题。哪位大侠知道是什么原因,如何彻底解决问题?先谢了。
-xishuiwanfeng(水壶芦);
2016-10-19
{237}
(#10367895@0)
-
首先确认是显示器问题还是主机问题,再研究是显卡还是电源,主板等等。
-brucezc(fat man);
2016-10-19
(#10367941@0)
-
主机问题,换一个显示器还是出现同样现象。
-xishuiwanfeng(水壶芦);
2016-10-19
(#10367986@0)
-
更换主板CMOS 电池试试看
-madog(武疯子);
2016-10-21
(#10373630@0)
-
看看是不是插头接触不好。
-efsuca(采石矶);
2016-10-19
(#10367968@0)
-
显示器应该有两种信号输入接口,一个是最原始的rgb接口,还有就是现在通用的hdmi接口。看看你的显示器是不是有这两个接口。你说的这个问题一般是接hdmi接口容易出现。你用另外一个rgb接口连接,看是不是还出现这个故障。
-peter8540(皮蛋);
2016-10-20
(#10369225@0)
-
感觉你的电脑系统没有正常引导启动,不是显示器或者主板接口问题
-zzjiang(jeffrey);
2016-10-21
(#10373570@0)